Table of Contents


Battery

You can find our Battery feature by navigating to Sensors > Battery. Once your device is powered on, this is a strategic way to see how your mobile applications will perform on a device running on a low battery. Please take a look at the screenshot below for reference.

Next, we will take a deeper dive into this part of the Software.


Charge Level

You can use our special Charge Level option as a standardized indicator of electrical force, or voltage, at which your Virtual Machine is set to.

*Note: Your VM may eventually power OFF if you have the charge level set to a low level.*


Health

You can adjust the state of your battery's health.

Good

The battery performance is normal.

Failure

The battery can power ON the device, but the performance is very poor.

Dead

The device is not receiving any electrical energy and is powered OFF.

Overheat

The battery is working extra hard and is likely to rise in temperature.

Overvolt

The battery has been overcharged which can obstruct the performance of the device.


Connection

You can set whether the device is connected to a charger or not.

AC Charger

The device is connected to a power adapter.

None

The device is not connected to a power adapter.


Status

You can set your devices' charging status.

Charging

The device is receiving and is storing electrical energy.

Discharging

The battery is losing voltage or energy.

Not Charging

The device is not receiving and is storing electrical energy.

Did this answer your question?